Connector Plug Kit for 3B4 Servo



Have you broken the plug off your servo? No need to buy the complete harness, you can repair it with
this kit. This is a complete 8 Pin Connector kit for 2007 and up models with the 3B4 servo.

The kit includes:
1- 8 Pin Connector
8- Wire Seals
8- Terminal Pins

Installation Instructions:
To install this plug you will first need to label the servo harness wires 1-8 to ensure they go back in the
correct order. Next, cut your wires as far down the harness as possible. Next, you will slide the wire
seals over the ends of the wires, strip the ends, and crimp the terminals on. You will need a crimper tool
similar to this one to crimp the terminals on.
Crimper Tool on Amazon

Next, pop the white face off the 8 pin connector with a small
pick or screwdriver and insert the terminals from the back in the correct order as labeled in the first
step. The connector itself is numbered 1-8. Finally pop the white face back on the connector and you’re
done. Plug the connector on your servo and get back on the trails!


There are no reviews yet.

Be the first to review “Connector Plug Kit for 3B4 Servo”

Your email address will not be published.

Make Model Year
Make Model Year
Benneche All 4wd Models
Big Muddy All 4wd models
Coleman All 4wd Models
Hisun All 4wd Models
Massimo All 4wd models
Yamaha Big Bear 400 2007 - 2013
Yamaha Grizzly 350 (IRS) 2007 - 2014
Yamaha Grizzly 450 2008 - 2014
Yamaha Grizzly 550 2009 - 2014
Yamaha Grizzly 700 2007 - 2020
Yamaha Kodiak 700 2016 - 2020
Yamaha Rhino 700 2008 - 2014
Yamaha Viking 700 2014 - 2020
Yamaha Wolverine 700 2016 - 2020
Yamaha YXZ 1000 2016 - 2020